Introduction

Wi-Fi Smart Security Camera

User Manual

The CAM Slim Gen2 is a Wi-Fi security camera with 1080P resolution, capable of capturing every detail clearly. It supports real-time viewing of home situations and remote conversations on the app. You can push messages to the app in time by setting motion detection messages, and share them with your family.

1080P Live View

IR Night Vision

Alerts

Camera Hibernation

Two-way Audio

RTSP Protocol

Human Detection

Support Cloud Storage

① LED indicator

② Camera lens

③ Microphone

④ TF card slot

Base

⑥ Reset button

Long press the button for 5 seconds (device emits a “beep” sound): The device enters pairing mode (pairing duration: 30 minutes).

⑦ Power input interface (Type-C)

Instruction of LED indicator status

• Flashes two short and one long: Device is in pairing mode (Single press reset button to exit pairing mode).

• Keeps on: Online

• Flashes once quickly and lights up strongly at the same time: Device exits the network configuration state after being offline, network exception, or failure to connect to the network.

• Flashes twice rapidly: Device detects TF card (device will emit two “beep” sounds).

• Flashes once rapidly: Device being watched

Audio Alerts

• Single “beep” sound (Press and hold reset button for 5 seconds):Device is in pairing mode.
• Double “beep beep” sounds: Device detects TF card.

Compatible Voice Assistants
Specification
Model

CAM-S2

Input

5V1A

Interface type

Type-C

Lens aperture

F2.0

Resolution

1920×1080

Camera pixels

 

2 million pixels

Lens focal length

3.8mm

Video compression standard

H.264

Camera lens angle

100°

Storage methods

Cloud storage and TF card (Max.128GB for TF card)

Wireless connection

Wi-Fi IEEE 802.11 b/g/n 2.4GHz

Net weight

65g (Accessories not included)

Product dimension

48x46x86.5mm

Colour

White

Casing materials

PC+ABS

Applicable place

Indoor

Working temperature

-10℃~40℃

Working humidity

5%~95% RH, non-condensing

Certification

CE/FCC/RoHS

Executive standard

IEC/EN 62368-1

Installation

This device can be placed on a desktop (Figure ①), mounted on a wall (Figure ②), or installed on the ceiling (Figure ③).

Add a Device
Download the eWeLink App

Please download the “eWeLink” app from Google Play Store or Apple App Store.

Scan QR Code to Add Device

Enter “Scan”

Scan the QR code on the device

Select “Add Device”

Power on the device

Long press the reset button for 5 seconds.

Check Wi-Fi LED indicator flashing status

(Two short and one long flashes).

Wait for the device to be found and connected.

Select the “Wi-Fi” network and enter the password.

Device was added completely.