Introduction
SONOFF Wi-Fi Smart Security Camera
User Manual
CAM Eyes is an intelligent dual-lens variable-focus camera with 5 million pixels, supporting 2.4G and 5G dual-band Wi-Fi wireless connection. It features remote real-time monitoring, 360° panoramic cruising, motion detection, smart tracking, two-way communication, and supports TF card & cloud storage.
Smart Tracking
360° Panoramic Patrol
Two-way Audio
Time-lapse
Photography
Full Color/IR Night Vision
Privacy Shutter
Motion Detection
Support TF Card &
Cloud Storage
① Infrared LED
② LED indicator
③ Speaker
④ Wide-angle lens
⑤ Microphone
⑥ Pan/Tilt unit (Horizontal)
⑦ Pan/Tilt unit (Vertical)
⑧ Fill light
⑨ Telephoto lens
⑩ Reset button:Long press the button for 5 seconds (device emits a “beep” sound): The device enters Pairing mode (pairing duration: 30 minutes).
⑪ Power input interface (Type-C)
⑫TF card slot
Instruction of LED indicator status
- Red flashes twice short and once long: Device in pairing mode
- Solid blue: Device network configuration successful
- Blue slow flashing: Device exits the network configuration state after being offline, network exception, or failure to connect to the network.
- Blue flashes twice rapidly: Device detects TF card (device will emit two “beep” sounds)
- Blue flashes short-long: Device being watched
Audio Alerts
- Single “Beep” Sound (Press and Hold Reset Button for 5 Seconds): Device is in pairing mode.
- Double “Beep Beep” Sounds: Device detected TF card
Compatible Voice Assistants
Specification
Model
E-CAM
SoC
RK1109
Rating
5V⎓2A
Lens aperture
Type-C
Resolution
Main stream: 2888×1628, Sub-stream: 1280×720
Camera pixels
5 million pixels
Video compression standard
H.264
Pan/Tilt
355° horizontal, 97° vertical
Storage methods
Cloud storage and TF card (Max.128GB for TF card)
Wireless connection
Wi-Fi IEEE 802.11 a/b/g/n/ac 2.4GHz/5GHz Dual-band
Net weight
315g(Accessories not included)
Product dimension
94x76x133mm
Colour
Black & White
Casing material
ABS
Applicable place
Indoor
Working temperature
-10℃~45℃
Working humidity
5%~95% RH，non-condensing
Working height
Less than 2000m
Certification
CE/FCC/RoHS
Executive standard
EN 62368-1
Download the“eWeLink”App
Please download the “eWeLink” App from Google Play Store or Apple App Store.
Installation
This device can be placed on the desktop (Figure ①) or installed on the ceiling (Figure ②).
*The equipment is only suitable for mounting at heights ≤ 2 m.
Add a Device
1.Download the“eWeLink”App
Please download the “eWeLink” App from Google Play Store or Apple App Store.
2.Scan QR Code to Add Device
Enter “Scan”
Scan the QR code on the device
Select “Add Device”
When the device is powered on, the red and blue indicator flashes alternately.
After the device completes the reset, press and hold the device Reset button for 5 seconds.
Check Wi-Fi LED indicator flashing status (Two short and one long flashes).
Wait for the device to be found and connected.
Select the “Wi-Fi” network and enter the password.
Device was added completely.