Introduction
Matter Over WiFi Power Meter
User Manual
MINI-1GP is a compact smart energy meter (requires a neutral wire connection) that monitors device power consumption in real time and tracks electricity costs. It supports up to a 16A load for safe operation. With Matter support, local web control, and local API, it integrates seamlessly with multiple ecosystems for a more flexible home automation experience.
APP Monitoring
More Compact
Matter Support
Local Web Control
Smart Scene
Energy Monitoring
Local API
Up to 16A Support
① Button
- Press and hold for 5 seconds: Device enters pairing mode and activates AP hotspot
- Press and hold for 10 seconds: Factory reset
② LED Indicator (Blue)
- Keeps on: Device is online.
② LED Indicator (Red)
- Flashes two short and one long: Device is in pairing mode.
- Keeps on: Connected to LAN only
- Slow flashing red: Device is offline
- Fast flash: Factory Reset
Specification
Product Series
MINI Extreme Series Gen5
Product Name
Matter Over WiFi Power Meter
Product Model
MINI-1GP
MCU
ESP32C6
Rating
100-240V~ 50/60Hz 16A
Wi-Fi
IEEE 802.11 b/g/n 2.4GHz
Net Weight
14g
Dimensions
32×29×15.9mm
Color
White
Casing Material
PC
Diameter of Wiring (Recommended)
18 AWG to 14 AWG (0.75mm² to 2.5mm²) SOL/STR copper conductors only
Applicable Place
Indoor flush mounting
Working Temperature
10T40 (-10℃~40℃)
Working Humidity
10%~90% RH, non-condensing
FCC ID
2APN5-MINI1GP
Certification
CE/RoHS/FCC
Device Installation
1. Power off
- Please install and maintain the device by a professional electrician. To avoid electric shock hazard, do not operate any connection or contact the terminal connector while the device is powered on!
- To ensure the safety of your electrical installation, it’s essential either a Miniature Circuit Breaker (MCB) or a Residual Current operated Circuit-breaker with Integral Overcurrent protection(RCBO) with an electrical rating of 16A has been installed before the MINI-1GP.
- For single-phase use only (100–240V~). Connecting to multiple phases may result in damage to the device.
2. Wiring instruction
|
Terminals |
|
Wires |
|
|
N |
Neutral wire |
N |
Neutral wire |
|
L |
Live wire |
L |
Live wire (100~240V) |
|
L |
Live wire |
L |
Live wire (100~240V) |
|
L Out |
Live wire output |
|
|
Ensure wiring is connected correctly.3. Power on
After powering on, the device will enter the Pairing Mode during the first use. The LED indicator changes in a cycle of two short and one long flash and release.
ⓘ
Matter Ecosystem User Guide
Open the Matter-compatible App and scan the Matter QR code on the device to add it.
eWeLink Ecosystem User Guide
Add a Device
eWeLink Ecosystem User Guide
① Download the eWeLink App
Please download the “eWeLink” App from the Google Play Store or Apple App Store.
② Add Device
Enter “Scan”
Scan the QR code on the quick guide or the device
Select “Add Device”
(If the device exits pairing mode)
Long press the button for 5 seconds
Check LED indicator flashing status (Two short and one long)
Search for the device and start connecting
Select the “Wi-Fi” network and enter the password
Device “Added completely”
Web Console Guide
Method 1: Access via AP Hotspot
When the device is in pairing mode, it will automatically enable an AP hotspot. Please connect to the device hotspot SONOFF_1GP_xxxx, then enter the following in your browser:
192.168.33.1
to access the Web console.
Method 2: Access via LAN
After the device has completed network configuration, when you are on the same local network as the device, you can directly enter the following in your browser:MINI-1GP.local or the device’s IP address
to access the Web console.
Install the Device in an Electrical Box
Energy Monitoring Instructions
After adding the device to the eWeLink App, select the device on the home screen to access the main interface, where you can view voltage, current, and power information.
Factory Reset
Trigger conditions (any of the following):
- Tap “Factory Reset” in the eWeLink App.
- Tap “Factory Reset” on the web console.
- Press and hold the device button for 10 seconds.