Introduction

Matter Over WiFi Double Smart Wall Switch

User Manual

Orb-MW2 is a dual-channel smart wall switch based on 2.4GHz Wi-Fi. It requires a neutral wire for operation and supports a maximum load of 16A (total), meeting the control needs of various household devices. It is also compatible with the Matter platform, enabling seamless integration with multiple smart home systems.

Remote Control

Matter Compatibility

Voice Control

Smart Scene

Smart Schedule

Share Device

Power-on State

Group Control

① Switch Button

  • Short press once: Turns the connected load on or off.
  • Short press the same key 10+ times consecutively (with intervals <1 second): The device enters pairing mode.

② Device Button

  • Press and hold for 5 seconds: Device enters the pairing mode. (Pairing time 10 minutes)

③ LED indicator (Blue)

eWeLink Mode
  • Flashes two short and one long: Device is in pairing mode.
  • Keeps on: Device is online.
  • Flashes once: Offline
  • Flashes twice: Device is connected to the router but not to the cloud.
Matter Mode
  • Flashes two short and one long: Device is in pairing mode.
  • Keeps on: Device is online.
  • Flashes once: Offline

Specification

Product name

Orb-MW2

Product series

Fusion series

Product type

Matter Over WiFi Double Smart Wall Switch

Model

MINI-2GS-E

MCU

ESP32-C3FH4X

Rating

110-240V~ 50/60Hz 10A/gang, Total 16A MAX Resistive loadμ

Wi-Fi

IEEE 802.11b/g/n 2.4GHz

Net weight

96.5g

Product dimension

86x86x33.7mm

Color

White

Casing material

PC

Diameter of wiring (recommend)

16AWG to 14AWG SOL/STR copper conductor only

Applicable place

Indoor

Working temperature

10T40 (-10℃~40℃)

Working humidity

5-95%RH, non-condensing

Certification

CE/RoHS

Installation

1. Power off

⚠ WARNING

① Please install and maintain the device by a professional electrician. To avoid electric shock hazards, do not operate any connection or contact the terminal connector while the device is powered on!

② To ensure the safety of your electrical installation, it’s essential that either a Miniature Circuit Breaker (MCB) or a Residual Current operated Circuit-breaker with Integral Overcurrent protection (RCBO) with an electrical rating of 16A has been installed before the MINI-2GS-E.

2. Pry off the switch cover

3. Wiring instruction

ⓘ  Make sure all wires are connected correctly.

Instructions for wiring symbols

Terminals

Wires

L

Live Terminal

L 

Live Line（110-240V~）

N

Neutral Terminal

N

Neutral Line

L1

Live Output Terminal_1 (110-240V~)

L2

Live Output Terminal_2 (110-240V~)

S1

Switch_1

S2

Switch_2

4. Power on

When the device is used for the first time, it will enter pairing mode by default after being powered on. At this time, the LED indicator will flash in a pattern of “two short and one long”.

ⓘ The device will exit the Pairing Mode if not paired within 10mins. If you want to enter this mode, please long-press the device button for about 5s until the LED indicator changes in a cycle of two short and one long flash and release.

Add a Device

Matter Ecosystem User Guide

Open a Matter-compatible App to scan the Matter QR code on the Quick Guide or the device itself to add the device.

Add to Apple

via Matter

Add to Google

via Matter

Add to Alexa

via Matter

Add to SmartThings

via Matter

eWeLink Ecosystem User Guide

1. Download the eWeLink App

Please download the “eWeLink” App from Google Play Store or Apple App Store.

2. Add Device

Enter “Scan”

Scan the QR code on the quick guide or the device

Select “Add Device”

(If the device exits pairing mode)
Long press the device button for 5 seconds

Check LED indicator flashing status
(Two short and one long)

Search for the device and start connecting

Select the “Wi-Fi” network and enter the password

Device “Added completely”

Installation

Factory Reset

Trigger conditions (any one condition met)

  • Delete the device from the eWeLink App.
  • Press and hold the device button for 10 seconds.