Introduction
2-Gang Matter Over WiFi Smart Switch
User Manual
The MINI DUO (Matter over Wi-Fi) is an ultra-compact dual-channel smart switch designed to fit neatly inside standard mounting boxes. Supporting a total load of up to 16A, it transforms traditional switches into smart switches. With Matter protocol support, it integrates seamlessly with smart devices from other brands, empowering you to build a personalized and unified home automation system.
Remote Control
Timer Schedule
Support Matter
Voice Control
Smart Scene
Power-on State
Share Device
Group Control
① Button
- Press and hold for 5 seconds: Device enters the pairing mode. (Pairing time 10 minutes)
- Click three times in succession: Switch external switch type.
② LED indicator (Blue)
eWeLink Mode
- Flashes two short and one long: Device is in pairing mode.
- Keeps on: Device is online.
- Flashes once: Offline
- Flashes twice: Device is connected to the router but not to the cloud.
Matter Mode
- Flashes two short and one long: Device is in pairing mode.
- Keeps on: Device is online.
- Flashes once: Offline
Platform Certification
Specification
Installation
1. Power off
⚠︎WARNING
Please install and maintain the device by a professional electrician. To avoid electric shock hazards, do not operate any connection or contact the terminal connector while the device is powered on!
2. Wiring instruction
ⓘ To ensure the safety of your electrical installation, it’s essential that either a Miniature Circuit Breaker (MCB) or a Residual Current operated Circuit-breaker with Integral Overcurrent protection (RCBO) with an electrical rating of 16A has been installed before the MINI-2GS.
ⓘ For single-phase use only (100–240V~). Connecting to multiple phases may result in damage to the device.
ⓘ Make sure all wires are connected correctly.
ⓘ It is prohibited to connect S1 and S2 terminals to the neutral or ground wire, in order to avoid damaging the equipment and causing danger.
ⓘ Supported switches include rocker switches and push buttons, and factory default is the rocker switch. Method of changing the switch type: short press the button 3 times until the LED signal indicator flashes 3 times quickly, now you change the switch type successfully.
Instructions for wiring symbols
|
Terminals |
|
Wires |
|
|
L |
Live Line |
L |
Live Line（110-240V~） |
|
L |
Live Line |
L |
Live Line（110-240V~） |
|
N |
Neutral Line |
N |
Neutral Line |
|
L1 |
Live Output Terminal_1 (110-240V~) |
|
|
|
L2 |
Live Output Terminal_2 (110-240V~) |
|
|
|
S1 |
Switch_1 |
|
|
|
S2 |
Switch_2 |
|
|
3. Power on
When the device is used for the first time, it will enter pairing mode by default after being powered on. At this time, the LED indicator will flash in a pattern of “two short and one long”.
ⓘ
Add a Device
Matter Ecosystem User Guide
Open a Matter-compatible App to scan the Matter QR code on the Quick Guide or the device itself to add the device.
Add to Apple
via Matter
Add to Google
via Matter
Add to Alexa
via Matter
Add to SmartThings
via Matter
eWeLink Ecosystem User Guide
1. Download the eWeLink App
Please download the “eWeLink” App from Google Play Store or Apple App Store.
2.
Enter “Scan”
Scan the QR code on the quick guide or the device
Select “Add Device”
(If the device exits pairing mode)
Long press the button for 5 seconds
Check LED indicator flashing status
(Two short and one long)
Search for the device and start connecting
Select the “Wi-Fi” network and enter the password
Device “Added completely”
Install the device in the mounting box
Factory Reset
Trigger conditions (any one condition met)
- Delete the device on eWeLink App.
- The device that has been successfully paired can be paired again with another eWeLink account to add it.
- Press and hold the device button for 10 seconds.