Introduction
Zigbee Power Meter
User Manual
The MINI-ZB1GP is a compact Zigbee smart energy meter (requires neutral wire connection) that monitors real-time power consumption and calculates electricity costs. It supports a maximum load of 16A, ensuring electrical safety. It also supports on-demand export of power data and allows smart scene configuration, creating a more reliable home power usage environment.
Remote Monitoring
Smart Scene
Repeater Function
Supports loads up to 16A
More Compact
Zigbee3.0
Energy Monitoring
One Year of Historical Data
① Button
- Press and hold for 5 seconds: Device enters pairing mode (Zigbee pairing + Bluetooth pairing, pairing lasts for 3 minutes).
- Short-press once, then press and hold for 5 seconds within 3 seconds: Activates Bluetooth pairing mode (only effective after pairing with a Zigbee gateway).
- Press and hold for 10 seconds: Factory reset.
② LED Indicator (Blue)
- Slow flashing for 180 seconds: First power-on, entering pairing state (Zigbee pairing + Bluetooth pairing).
- Steady off: Pairing failed/timed out.
- Steady on: Connected to the gateway normally.
- Fast flashing: Abnormal connection to the gateway.
- Two fast flashes followed by one slow flash: Bluetooth pairing mode active.
Specification
Product Series
MINI Extreme Series Gen5
Product Name
Zigbee Power Meter
Product Model
MINI-ZB1GP
MCU
EFR32MG21
Rating
100-240V~ 50/60Hz 16A
Zigbee
IEEE 802.15.4
Net Weight
14g
Dimensions
32x29x15.9mm
Color
White
Housing Material
PC
Recommended Wire Gauge
18 AWG to 14 AWG (0.75mm² to 2.5mm²) SOL/STR copper conductor only
Installation Location
Indoor concealed installation
Operating Temperature
-10℃~ 40℃
Operating Humidity
10%~90% RH, non-condensing
Voltage Measurement Range
110-240V
Current Measurement Range
0-16A
Power Measurement Range
0-3840W
Pollution Degree
II
Operating Altitude
2000M
Maintenance
Temperature: MINI-ZB1GP operating temperature is -10℃~40℃. Exceeding this temperature range will cause damage to the meter. Please note that it can influence the meter’s life negatively if the meter operates in extremely high or extremely low temperatures. MINI-ZB1GP storage temperature range is -30~70℃.
FCC ID
2APN5-MINIZB1GP
Certifications
CE / RoHS / FCC
Installation
1. Power off
① Installation and troubleshooting must be performed by a qualified electrician. Do not perform wiring or touch terminals while the device is powered on to avoid electric shock!
② To ensure safe electrical installation, a miniature circuit breaker (MCB) or residual current operated circuit breaker (RCBO) rated at 16A and compliant with national safety standards must be installed ahead of the MINI-ZB1GP.
③ For single-phase use only (100-240V~). Connecting to a multi-phase power supply may damage the device.
2. Wiring Instruction
|
Terminal |
|
Wires |
|
|
N |
Neutral wire |
N |
Neutral wire |
|
L |
Live wire |
L |
Live wire (100-240V~) |
|
L |
Live wire |
L |
Live wire (100-240V~) |
|
L Out |
Live wire output terminal |
|
|
Ensure wiring is correct.3. Power On
After power-on, the device enters pairing mode by default for first-time use, with the LED slowly flashing.
If no pairing is performed within 3 minutes, the device exits pairing mode. To re-enter pairing mode, press and hold the button for 5 seconds until the LED slowly flashes.Download the eWeLink App
Please download the “eWeLink” App from the Google Play Store or Apple App Store.
Add a SONOFF Zigbee Gateway
Compatible Gateways:
Recommended SONOFF gateway models: ZBBridge-P, ZBBridge-U, NSPanel Pro, iHost
Other compatible SONOFF gateway models: ZBDongle-P, ZBDongle-E
Add Device
Method 1: Scan QR Code
Open “Scan” in the app
Scan the QR code on the device
Select “Add Device”.
(If device exits pairing mode) Press and hold the button for 5 seconds
Check that the LED is slowly flashing
Select the Zigbee gateway
Add device and select “Finish”
Method 2: Activate Gateway Pairing Mode
Press and hold the button for 5 seconds to confirm the device enters pairing mode
Check that the LED is slowly flashing
Select the gateway on the eWeLink app home page
Find and click “Add Device” in the gateway page
Gateway enters pairing mode, wait for pairing to complete
Install the Device in the Mounting Box
How to View Metering Data
After adding the device to the eWeLink App, select the device from the home page to enter the main device interface, where you can view voltage, current, and power information.
Factory Reset
Trigger conditions (any of the following):
- Delete the device from the eWeLink App.
- Press and hold the button for 10 seconds.