Introduction

Zigbee Double Smart Wall Switch (No Neutral Required)

User Manual

The Orb-ZBW2L is a dual-channel smart wall switch based on Zigbee 3.0 technology and requires no neutral wire. Each channel supports up to 8A, with a maximum total load of 12A when both channels operate simultaneously. Additionally, it supports scheduled control and can interact with other SONOFF devices in smart scenarios, further enhancing your home automation experience.

Remote Control

Timer Schedule

Smart Scene

Power-on State
Dual Load Control
Voice Control

Share Device

Group Control

① Switch Button

  • Short press once: Turns the connected load on or off.
  • Short press the same key 10+ times consecutively (with intervals <1 second): The device enters pairing mode.

② Device Button

  • Press and hold for 5 seconds: Device enters the pairing mode. (Pairing time 3 minutes)

③ LED indicator（Green）

  • Slow flash: Device is in pairing mode.
  • Keeps off: Normal connection with the gateway.
  • Fast flash: Abnormal connection with the gateway, Pairing failure/Timeout.
  • Flashes five times quickly: Trigger Factory Reset

Specification

Product name

Orb-ZBW2L

Product series

Fusion series

Product type

Zigbee Double Smart Wall Switch (No Neutral Required)

Model

MINI-ZB2GS-L-E

MCU

EFR32MG22

Rating

100-240V~ 50/60Hz 8A/gang, Total 12A MAX Resistive loadμ

LED

300W@240V/gang, 150W@100V/gang, Total 600W@240V, 300W@100V

Min. load

3W (No Neutral Required)

Zigbee

IEEE 802.15.4

Net weight

96.5g

Product dimension

86x86x33.7mm

Color

White

Casing material

PC

Diameter of wiring (recommend)

16AWG to 14AWG SOL/STR copper conductor only

Applicable place

Indoor

Working temperature

10T40 (-10℃~40℃)

Working humidity

5-95%RH, non-condensing

Certification

CE/RoHS

Installation

1. Power off

⚠ WARNING

① Please install and maintain the device by a professional electrician. To avoid electric shock hazards, do not operate any connection or contact the terminal connector while the device is powered on!

② To ensure the safety of your electrical installation, it’s essential that either a Miniature Circuit Breaker (MCB) or a Residual Current operated Circuit-breaker with Integral Overcurrent protection (RCBO) with an electrical rating of 12A has been installed before the MINI-ZB2GS-L-E.

2. Pry off the switch cover

3. Wiring instruction

ⓘ  Make sure all wires are connected correctly.

Instructions for wiring symbols

Terminals

Wire

L

Live Terminal

L In

Live Line（100-240V~）

L1

Live Output Terminal_1 (100-

240V~)

L2

Live Output Terminal_1 (100-

240V~)

S1

Switch_1

S2

Switch_2

4. Power on

After powering on, the device will enter the pairing mode by default during the first use, and the LED signal indicator will “flash slowly”.

Add a Device

1. Download the eWeLink App

Please download the “eWeLink” App from Google Play Store or Apple App Store.

2. Add SONOFF Zigbee gateway

3. Network configuration

Enter “Scan”.

Scan the QR code on the device

Select “Add Device”.

(If the device exits pairing mode) Long press the button for 5 seconds

Check LED indicator flashing status (Slow flash)

Select Zigbee gateway

Wait until the addition is done.

Compatible SONOFF Gateways

Recommended SONOFF gateway models: ZBBridge-P, ZBBridge-U, NSPanel Pro, iHost

Other compatible SONOFF gateway models: ZBDongle-P, ZBDongle-E, Dongle-M,

Dongle-PMG24, Dongle-LMG21

Installation

Factory Reset

Trigger conditions (any one condition met)

  • Press and hold the device button for 10 seconds.
  • Delete the device on the App.