Introduction

Matter Over Wi-Fi Smart Plug

User Manual

The S60TPF-M is a smart plug that supports 2.4GHz Wi-Fi connectivity, is compatible with Type E and Type F sockets, and has a maximum load current of up to 16A. Its flame-retardant housing design effectively ensures electrical safety. In addition to energy monitoring and electricity cost calculation functions, it also features overload protection and overcharge protection. By integrating with the Matter ecosystem, the S60TPF-M can easily connect with various smart home systems.

Matter Compatibility

Overcharge Protection

Energy Overview

Smart Timer

Electricity Bill Tracking

Smart Scene

Overload Protection

Flame-Retardant Material

① Button

  • Short-press once: Turn the device on or off.
  • Long-press for 5 seconds: Device enters pairing mode (pairing duration: 10 minutes).

② Wi-Fi Indicator (Blue)

eWeLink Mode

  • Two short flashes, one long flash: Device is in pairing mode.
  • Always off: Device is online.
  • Single flash: Device is offline.
  • Double flash: LAN mode (Access Point mode).

Matter Mode

  • Two short flashes, one long flash: Device is in pairing mode.
  • Always off: Device is online.
  • Single flash: Device is offline.

③ Power Indicator (Red)

  • Light on: Device is on.
  • Light off: Device is off. 

Platform Certification

Specification
S60 Matter

 

Product Series

iPlug Gen2 Series

Product Name

Matter over Wi-Fi Smart Plug

Model Number

S60TPF-M

Rating

250V~ 50/60Hz 16A Max μ

Max. Load

4000W

Wi-Fi

IEEE 802.11 b/g/n 2.4GHz

Net Weight

82.3g

Product Dimensions

50x50x80mm

Product Color

White

Housing Material

PC

Installation Location

Indoor

Operating Altitude

Below 2000 meters

Operating Temperature

10T40（-10℃~40℃）

Operating Humidity

5% ~ 95% RH, non-condensing

Product Certifications

CE/RoHS

WARNING

To ensure electrical installation safety, a miniature circuit breaker (MCB) or residual current operated circuit breaker (RCBO) with a rated current of 16A complying with national safety standards must be installed upstream of the S60TPF-M.

Add Device

Power on

When the device is first used, it will enter pairing mode by default after power-on. At this time, the Wi-Fi indicator flashes with “two short flashes followed by one long flash.”

ⓘ If pairing is not completed within 10 minutes, the device will exit pairing mode. To re-enter, long-press the device button for 5 seconds until the Wi-Fi indicator flashes with two short flashes followed by one long flash.

Matter Ecosystem User Guide

Open a Matter-compatible App and scan the Matter QR code on the device body to add the device.

Add to Apple

via Matter

Add to Google

via Matter

Add to Alexa

via Matter

Add to SmartThings

via Matter

Add to Home Assistant

via Matter

eWeLink Ecosystem User Guide

1. Download the eWeLink App

Please download the “eWeLink” App from Google Play Store or Apple App Store.

2. Add Device

ⓘ Phone must connect to 2.4GHz Wi-Fi.

Enter “Scan”

Scan the QR code on the device

Select “Add Device”

(If the device has exited pairing mode)
Long-press the device button for 5 seconds

Check the Wi-Fi indicator flash status 
(two shorts, one long)

Search for device and connect

Select a 2.4GHz Wi-Fi network and enter the password

Device added successfully

Factory Reset (Dual Ecosystem)

Trigger conditions (any one condition met)

  • After deleting the device in the eWeLink App.
  • A device that has been successfully paired in eWeLink is successfully paired again using another eWeLink account.
  • A device that has been successfully paired in Matter is successfully paired again via Matter Bluetooth pairing.