Introduction

Matter Over Wi-Fi Smart Plug

   

User Manual

The S60TPG-M is a Type G smart plug that supports 2.4 GHz Wi-Fi connectivity and a maximum load current of 13A. Its flame-retardant enclosure helps enhance electrical safety. In addition to energy consumption monitoring and electricity bill tracking, it features overload protection and overcharge protection. With Matter integration, the S60TPG-M can seamlessly connect to a wide range of smart home ecosystems.

Matter Compatibility

Overload Protection

Energy Overview

Electricity Bill

Tracking

Timer Reminder

Overcharge Protection

Smart Scene

Flame-Retardant

Material

① Button

  • Short-press once: Turn the device on or off.
  • Long-press for 5 seconds: Device enters pairing mode (pairing duration: 10 minutes).

② Wi-Fi Indicator (Blue)

eWeLink Mode

  • Two short flashes, one long flash: Device is in pairing mode.
  • Always off: Device is online.
  • Single flash: Device is offline.
  • Double flash: LAN mode (Access Point mode).

Matter Mode

  • Two short flashes, one long flash: Device is in pairing mode.
  • Always off: Device is online.
  • Single flash: Device is offline.

③ Power Indicator (Red)

  • Light on: Device is on.
  • Light off: Device is off.
Compatible AI Voice
Specification
S60 Matter (Type G)

Product Series

iPlug Gen2 Series

Product Name

Matter over Wi-Fi Smart Plug

Model

S60TPG-M

Rating

Max 13A 250V~ 50/60Hz

Max Load

3250W

Wi-Fi

IEEE 802.11 b/g/n 2.4GHz

Net Weight

86g

Product Dimensions

58 × 58 × 42mm

Product Color

White

Housing Material

PC

Installation Location

Indoor

Operating Temperature

10T40 (-10℃~40℃)

Operating Humidity

5% ~ 95% RH, non-condensing

Product Certifications

CE/RoHS

width="100" WARNING:

To ensure the safety of your electrical installation, it’s essential that either a Miniature Circuit Breaker (MCB) or a Residual Current Operated Circuit-breaker with Integral Overcurrent Protection(RCBO) rated at 13A be installed before the S60TPG-M.

Power On

Scan the device’s QR code using a Matter-compatible app or the eWeLink App, then connect the device to a power source.

When the device is first used, it will enter pairing mode by default after power-on. At this time, the Wi-Fi indicator flashes with “two short flashes followed by one long flash.”

width="100" If pairing is not completed within 10 minutes, the device will exit pairing mode. To re-enter, long-press the device button for 5 seconds until the Wi-Fi indicator flashes with two short flashes followed by one long flash.

Matter Ecosystem User Guide

Add to Apple

via Matter

Add to Google

via Matter

Add to Alexa

via Matter

Add to SmartThings

via Matter

Add to Home Assistant

Home Assistant

eWeLink Ecosystem User Guide

1. Download the eWeLink App

Please download the “eWeLink” App from the Google Play Store or Apple App Store.

Add  Device

width="100" Phone must connect to 2.4GHz Wi-Fi..

Enter“Scan”

Scan the QR code on the device

Select “Add Device”

(If the device has exited pairing mode)
Long-press the device button for 5 seconds

Check the Wi-Fi indicator flash status (two shorts, one long)

Search for device and connect

Select a 2.4GHz Wi-Fi network and enter the password

Device added successfully

Factory Reset (Dual Ecosystem)

Trigger conditions (any one condition met)

  • After deleting the device in the eWeLink App.
  • A device that has been successfully paired in eWeLink is successfully paired again using another eWeLink account.
  • A device that has been successfully paired in Matter is successfully paired again via Matter Bluetooth pairing.