Introduction
Zigbee Smart Scene Button
User Manual V1.0
The Orb 4-In-1 is a four-button scene switch that supports two modes: Zigbee Mode and eWeLink-Remote Mode. Each button allows single, double, triple, and long press actions to quickly trigger scenes, with up to 16 scenes customizable in the eWeLink app. Certain smart bulbs can also be controlled directly via TouchLink or Bindings. Stick-on mounting is supported for hassle-free installation—no wiring required.
Dual Mode
Smart Scene
Magnetic Installation
Dual Mode
Tap to Control
Smart Scene
Magnetic Installation
① Button
• Single-click / Double-click / Triple-click / Long press: Triggers the corresponding smart scene
*The Triple-click is only supported in Zigbee mode
② LED indicator
Zigbee Mode
• Slow flash: Device is in Zigbee pairing state
• Steady on for 3 seconds: Zigbee pairing successful
③ Reset Button
• Press and hold for 5 seconds: Device enters Zigbee pairing mode (pairing duration: 3 minutes)
④ Slide Switch
• Zigbee Mode: The device can be added to a Zigbee gateway and used as a Zigbee sub-device to create scenes
• eWeLink-Remote Mode: The device can be added to the eWeLink-Remote gateway and used as an eWeLink-Remote sub-device to create scenes
Specification
Product name
Orb 4-In-1
Product series
Fusion series
Product type
Smart Scene Button
Model
SNZB-01M
MCU
TLSR8656F512ET32
Input
3V
Battery model
CR2477
Zigbee
IEEE 802.15.4
Net weight
53g (Includes battery)
Color
White
Product dimension
φ50×22.5mm
Casing material
PC
Applicable place
Indoor
Working temperature
-10°C ~ 60°C
Working humidity
5-95%RH, non-condensing
Certification
CE/FCC/RoHS
Mode Selection
Use a coin to unscrew the battery cover.
Toggle the slide switch to select either Zigbee Mode or eWeLink-Remote Mode.
(Default Zigbee mode)
Power On
Take out the battery insulation sheet.
In Zigbee Mode, after powering on the device for the first time, it will enter the pairing status by default and the signal indicator “flashes slowly”.
The device will exit the pairing status if not paired within 3 minutes. If you want to enter again, please long-press the reset button for about 5s until the signal indicator “flashes slowly”.
Add a Device
Download the eWeLink App
Please download the “eWeLink” App from Google Play Store or Apple App Store.
Zigbee Mode
1. Add SONOFF Zigbee Gateway
2. Add Device
Enter "Scan"
Scan the QR code on the device
Select "Add Device"
(If the device exits pairing mode)
Long press the button for 5 seconds
Check LED indicator flashing status (Slow flash)
Select Zigbee gateway
Wait until the addition is done.
3. Compatible SONOFF Gateways
Recommended SONOFF gateway models: ZBBridge-P, ZBBridge-U, NSPanel Pro, iHost.
Other compatible SONOFF gateway models: ZBDongle-P, ZBDongle-E, Dongle-M, Dongle-PMG24, Dongle-LMG21
eWeLink-Remote Mode
1. Add Device
Click "..." on the homepage of the supporting gateway
Click "eWeLink-Remote-devices" in the Device Settings
Click "Add" button, and eWeLink-Remote gateway will enter the learning mode
Click the sub-device button within 10 seconds
Click any button on the sub-device to add the device.
2. Compatible eWeLink-Remote Gateways
https://help.sonoff.tech/docs/How-to-pair-with-eWelinkRemote-Gateway?search=1
This device is connected to a regular switch and used together with a product that provides eWeLink-Remote gateway function. Click on the image or enter the website address to view compatible products.
Smart Scenes Settings
Orb 4-In-1 can only be used as a triggering device, rather than an executing device.
Select "+" on the scene page to add a new scene
Select "Add" triggers
Select "Smart Device"
Select "Orb 4-In-1" and follow the steps to configure the conditions
Add the linked device
Complete the scene setup
Other Operation Modes
TouchLink
TouchLink is a convenient pairing function of the Orb 4-In-1. It simplifies the device pairing process, allowing direct connection and control with smart bulbs that support the TouchLink protocol, without the need for a gateway or complex configuration.
For detailed operation, see:
Bindings
Zigbee Binding is a technology that allows two or more Zigbee devices to communicate directly. By using the Binding function, the Orb 4-In-1 can be bound directly to smart lights, enabling local control of switching, brightness adjustment, and other core functions. This is particularly suitable for scenarios requiring high stability and fast response.
For detailed operation, see:
Installation
Base Mounting
The device is only suitable for installation at a height of ≤2 meters.
Replace the Battery
Factory Reset
Long press the device reset button for 5 seconds to restore factory settings. This will erase all Zigbee network information, including TouchLink and Bindings, and the device will re-enter Zigbee pairing mode.