Introduction
Zigbee Temperature Humidity Sensor
User Manual V1.0
SNZB-02B is a low-power, screen-free temperature and humidity sensor that can monitor environmental temperature and humidity in real time. It can be easily hung or attached, making installation simple. By setting smart scenes, it helps keep you in a comfortable environment at all times.
High Accuracy
Temperature & Humidity Monitoring
App Monitoring
Dew Point Measurement
Data Storage & Export
Smart Scene
Note: The above features depend on the capabilities of the Zigbee gateway.
① Pairing Button
· Long press for 5s: Enter pairing mode (180s duration)
· Long press for 10s: Restore factory settings
② Indicator Light
· Slow flashing (180s): Device is in pairing mode
· Solid on for 3s then off: Pairing successful
· Stops slow flashing, remains off: Pairing failed
· Flashes once: Not added to the gateway, short press pairing button
· Flashes twice: Added to the gateway, short press pairing button
· Two short flashes and one long: Communication abnormal, reconnecting
· Flashes five times quickly: Factory reset, long press 10s pairing button
Specification
Product Series
AirGuard Series
Product Name
Zigbee Temperature Humidity Sensor
Model
SNZB-02B
MCU
TLSR8656
Input
3.0V
(2×1.5V batteries)
Battery Model
LR03 AAA
Wireless Connection
Zigbee 3.0 (IEEE 802.15.4)
Net Weight
43.0g (including batteries)
Color
White
Dimensions
66.3×27.8×20mm
Casing Material
PC
Application Environment
Indoor
Operating Temperature
-20°C ~ 60°C
Operating Humidity
5-95%RH (non-condensing)
Certification
CE/FCC/RoHS
Download the eWeLink App & Add SONOFF Zigbee gateway
Please download the “eWeLink” App from the Google Play Store or Apple App Store.
Power On the Device
Locate the battery cover latch and pry it open using a tool, then take out the battery insulation sheet to power on the device.
After powering on, the device enters pairing mode by default on first use, with the indicator flashing slowly for 180 seconds.
If no pairing is completed within 3 minutes, the device will exit pairing mode. To re-enter, press and hold the button for 5 seconds until the indicator flashes slowly.
Add a Device
① Add SONOFF Zigbee Gateway
|
Compatible Gateways |
|
|
Recommended SONOFF Gateways |
ZBBridge-P, ZBBridge-U, NSPanel Pro, iHost |
|
Other Compatible SONOFF Gateways |
ZBDongle-P, ZBDongle-E, Dongle-M, Dongle-PMG24, Dongle-LMG21 |
Enter “Scan QR code”
Scan the QR code on the device
Select “Add Device”
(If the device exits pairing mode) Long press the button for 5 seconds
The LED indicator flashes slowly for 180s
Select Zigbee gateway
Wait until the device is added
Wait until the device is added
Third-Party Compatible Gateways
|
Third-Party Compatible Gateways |
|
|
Samsung gateway models |
SmartThings hub V3, AeoTec Smart Home Hub V3 |
|
Amazon gateway models |
Echo Plus 2nd, Echo 4th Gen, Echo Show 2nd |
Other gateways supporting Zigbee 3.0 protocol and temperature & humidity sensors. Please confirm with the gateway manufacturer.Effective Communication Distance Verification
Install the device in the desired place, then press the Pairing button on the device. The LED indicator flashes twice, indicating that the device and other devices on the same Zigbee network (the router device or hub) are in the effective communication distance.
Installation
Hang with the lanyard
Stick to the wall with 3M adhesive
Place freely
This device is intended for installation at a height of no more than 2m. Replace the battery
Locate the battery cover latch and pry it open using a tool.
If replacing the batteries, use the same type of battery.Factory Reset
- Tap the “Delete device” button in the eWeLink App;
- Press and hold the pairing button for 10 seconds until the indicator flashes five times.
The device will then be restored to factory settings.