SNZB-06P is a human-presence sensor based on 5.8G microwave technology, which realizes the human-presence sensing function by actively detecting ambient motion and human breath. It effectively avoids the embarrassing scene where the light automatically off when people are on the spot, making your home life smarter.

① Human presence sensor

② Magnetic base

③ Button

④ LED indicator (Red)

• Flash slowly for 180 seconds：First-time power on/press and hold button for 5s to enter pairing mode
• Keep on for 3s and then keep off：Paired successfully
• Exit flashing slowly and keep off：Distribution failure/timeout
• Flash once quickly：Not added to the gateway, and short press the button
• Flash twice quickly ：Added to the gateway and online, and short press the button
  

⑤ Power input interface（Type-C）

SNZB-06P

180s

Communication distance

SONOFF ZBBridge, ZBBridge-P, NSPanel PRO, AIBridge, ZBDongel-P，ZBDongel-E

Third-party compatible gateway models:

Amazon Gateway Model: Echo Plus 2nd, Echo Show 2nd Other gateways supporting ZigBee3.0 wireless protocol. Detailed information is in accordance with the final product.

*Displays as a human motion sensor under some gateways.

Install the device in the desired place, then press the Pairing button on the device. The LED indicator flashes twice means the device and the device under the same Zigbee network (the router device or hub) are in the effective communication distance.

1. Place on the desktop

2. Attached to the metal surface with the magnetic base

3. Stick to the wall with 3M adhesive of the base

4. Base screws fixed to the wall

The radar’s radial detection distance is approximately 4 meters.

1. Keep off moving objects including such as curtains, greenery, fans and pets during installation to avoid the device’s misjudgment that there are persons nearby.
2. Non-metallic materials including such as glass, plastic, ceramics and plank can be pierced through.
3. Multiple sensors should be installed in the same direction or back-to-back, avoiding front-to-front irradiation, and each sensor should be more than 1 meter away from others.

Enter“scan QR code”mode

Select“Add Device”

Long press the button for 5 seconds