Introduction
Smart Motion Sensor
User Manual V1.0
SNZT-03P is a low-power motion sensor based on Zigbee 3.0 and Matter over Thread protocols, allowing easy integration with multiple ecosystems. With smart scenes, it can be used to automatically turn lights on when people enter and off when they leave hallways, corridors, and other areas. It can also be used for security scenarios such as unauthorized intrusion, triggering cameras to record video, gateways to sound alarms, and app notifications. Enjoy a more flexible and intelligent home automation experience.
Zigbee 3.0
Matter over Thread
Motion Detection
Ambient Light Detection
①
②
③
④
LED Indicator Status
|
Matter over Thread Indicator Status |
Description |
|
Slowly flashes green for 10 min |
On first power-up / press and hold the button for 5s to enter pairing mode |
|
Solid green for 3s, then off |
Matter/Thread pairing successful |
|
Stops slowly flashing green and turns off |
Matter/Thread pairing failed |
|
Flashes green twice |
Added to Thread and device is online; short-press the button |
|
Two short green flashes followed by one long flash for 30s |
Thread communication error |
|
Flashes green rapidly 5 times |
Factory reset |
|
Zigbee Indicator Status |
Description |
|
Slowly flashes red for 180s |
Press and hold the button for 5s to enter pairing mode |
|
Solid red for 3s, then off |
Zigbee pairing successful |
|
Stops slowly flashing red and turns off |
Zigbee pairing failed |
|
Flashes red twice |
Added to Zigbee and device is online; short-press the button |
|
Two short red flashes followed by one long flash for 30s |
Zigbee communication error |
|
Flashes red rapidly 5 times |
Factory reset |
Specification
SenseGuard Motion Gen3
Product Series
SenseGuard Series
Product Name
SenseGuard Motion Gen3
Model
SNZT-03P
MCU
TLSR3238
Input
3V⎓
Battery Model
CR2477
Wireless Connection
Zigbee 3.0 / Thread (IEEE 802.15.4)
Product Color
White
Product Dimensions
44 x 44 x 65 mm
Net Weight
42.7 g (including battery)
Casing Material
PC
Pairing Time
180s
Communication Distance
100 m in an open area
Applicable Place
Indoor
Detection Angle
110°
Detection Distance
6m
Working Temperature
-10°C to 60°C
Working Humidity
5–95% RH, non-condensing
FCC ID
2APN5-SNZT03P
Certifications
CE/FCC/RoHS
Power On the Device
Rotate to open the sensor
Use a coin or other tool to unscrew the battery cover
Remove the battery insulation tab to power on the device
After powering on, the device enters Thread pairing mode by default on first use, and the indicator LED slowly flashes green.
If pairing is not completed within 10 minutes, the device exits pairing mode. To enter pairing mode again, press and hold the device button for 5 seconds until the indicator LED slowly flashes green.Matter Ecosystem User Guide
- To connect to a Matter platform via Thread, a Thread-capable Matter hub within the chosen ecosystem is required.
- Open a Matter-compatible App to scan the Matter QR code on the Quick Guide or the device itself to add the device.
Add to Apple
via Matter
Add to Google
via Matter
Add to Alexa
via Matter
Add to SmartThings
via Matter
Add to Home Assistant
via Matter
Zigbee User Guide
1. Download the eWeLink App
2. Add a SONOFF Zigbee Gateway
Compatible Gateways:
|
Recommended SONOFF Gateways |
ZBBridge-P, ZBBridge-U, NSPanel PRO, iHost |
|
Other Compatible SONOFF Gateways |
SONOFF ZBDongle Series |
|
Third-Party Gateways |
Amazon：Echo Plus 2nd, Echo 4th Gen, Echo Show 2nd |
This product also supports other gateways using the Zigbee 3.0 protocol. Compatibility is subject to the actual product.Ambient light detection may be unavailable with some gateways.3. Switch to Zigbee Mode
Press the device button five times to switch to Zigbee mode. The device then enters Zigbee pairing mode by default, and the indicator LED slowly flashes red.
If pairing is not completed within 3 minutes, the device exits pairing mode. To enter pairing mode again, press and hold the device button for 5 seconds until the indicator LED slowly flashes red.4. Add Device
Effective Communication Distance Verification
Install the device in the desired place, then press the Pairing button on the device. The LED indicator flashes twice means the device and the device under the same Zigbee network (the router device or hub) are in the effective communication distance.
Set the Detection Interval
1. Set via the app; the default is 60s
2. Set by double-clicking the device button
|
Indicator LED Status |
Detection Interval |
|
Solid for 1s, then flashes once |
5s |
|
Solid for 1s, then flashes twice |
10s |
|
Solid for 1s, then flashes three times |
30s |
|
Solid for 1s, then flashes four times |
60s |
Detection Range
The sensor has a radial detection range of approximately 6 m and a detection angle of 110°.
When the temperature difference between the surrounding environment and the human body is large (approximately 20°C or more), the detection range may increase.Installation
Place on a desktop
Attach the magnetic base to a metal surface
Attach the base to the wall with 3M adhesive
Secure the base to the wall with screws
This device is suitable for installation at a height of ≤2 m only.Installation Notifications
The following conditions may cause false alarms. Please choose the installation location carefully:(2)Direct infrared radiation from sunlight, vehicle headlights, incandescent lamps, etc. shining on the sensor.
(3)Rapid temperature changes in the detection area caused by warm or cool air from air conditioners, water vapor from humidifiers, etc.
The following conditions may cause missed detections. Please take note:(2)The detection target is almost stationary or moving at high speed.
Factory Reset
Press and hold the button for 10 seconds until the indicator flashes quickly for five times.