Introduction

SONOFF Zigbee Smart Water Valve

User Manual

A Zigbee Smart Water Valve powered by four AA batteries, which easy and quick to install. You can remotely control and set scheduled irrigation, quantitative irrigation, intelligent scenes and so on through the APP to make the traditional irrigation system intelligent. It supports statistics of irrigation water consumption, and can view 6-month historical records at any time, helping you better manage water resources and save water bills.

APP Control

Timed watering

6-month
history

Cyclic irrigation

Scene linkage

Water consumption
statistics

 

① Inlet
② Outlet
③ Button
• Single press: Turn on/off the smart device.
• Press and hold for 5 seconds: The device enters the pairing mode.

④ LED indicator (Green)

• Steady on: Normal connection with the gateway.
• Slow flash: The device is in pairing mode.
• Fast flash: Abnormal connection with the gateway.

 ⑤ Battery slot

Compatible Voice Assistants
Specification
Model

SWV-NH, SWV-BSP

MCU

EFR32MG22

Rating

6V(4*1.5V AA)

Wireless connection

Zigbee 3.0

Communication distance

130M(open space)

Waterproof 

IP55

Working Pressure

0.06~0.8 MPa

Net weight

278g

Dimension

152x100x46mm

Color

Black

Casing materials

PC+ABS

Working Temperatur

5~60℃

Watering Temperatur

5~40℃

Working humidity

5%~95% RH, non-condensing

Working altitude

≤2000M

Certification

CE/FCC/ISED

Executive standard

EN62368-1

Installation

First, wrap the thread seal tape around the thread of the faucet, then screw the nut of the water inlet of the equipment onto the faucet. After testing that there is no leakage, finally connect the hose to the water outlet of the equipment (if the water outlet leaks, please wrap thread seal tape around the thread of the water outlet).

*It is recommended to install vertically as horizontal installation may increase the error in flow rate measurement.

Communication Distance

The maximum communication distance of this device is 130M (open space).

Add a Device
1.Download the eWeLink App & Add SONOFF Zigbee Gateway

Please download the “eWeLink” App from Google Play Store or Apple App Store.

2.Scan QR Code to Add Device

Enter “Scan”

Scan the QR code on the device

Select “Add Device”

Long press the button for 5 seconds

The LED indicator flashes slowly for 180s

Select Zigbee gateway

Matched Gateways

Recommended SONOFF gateway models: ZBBridge-P (V2.0.0), NSPanel Pro (V3.3.0), iHost (V2.1.0), ZBBridge-U (soon to be supported)
*Before adding a device, please upgrade the gateway firmware to the above version or the latest version.
Other compatible SONOFF gateway models: ZBDongel-P, ZBDongel-E

Third-party compatible gateway models:

Amazon Gateway Model:Echo Plus 2nd, Echo Show 2nd, Echo 4th Gen
*Other gateways supporting ZigBee3.0 wireless protocol. Detailed information is in accordance with the final product.

Wait until the addition is done