Introduction
Smart Touch Wall Switch
User Manual
SONOFF TX Ultimate is a smart touch wall switch with LED lights which will produce sound,light and vibration effects when it is turned on/off. After adding in the eWeLink App, you canremote control on/off, switch the ambient lighting modes, set timer and smart scene on the phone.
Voice Control
Remote Control
Light Effects
Smart Scene
Ambient Lighting Mode
Touch Vibration
① Switch panel
② Touch control screen
③
- In the “Cycle mode”: Device is in pairing mode
- Flashes blue quickly once: Device is not connected to router
- Flashes blue quickly twice: Device is connected to the router, but not to the cloud
④ Wiring ports
Operation instruction
Quick click
Long press
Swipe
Multi-point click
- Click the switch panel quickly: Turn on/off the switches and trigger the
- Long press the switch panel for 5s: Make the device enter the pairing mode
- Swipe on the switch panel and ensure the swipe distance exceeds 50% of it: Trigger the smart scene
- Multiple fingers click the switch panel: Turn on/off the ambient light manually
Specification
Model
T5-1C-86/T5-2C-86/T5-3C-86/T5-4C-86
MCU
ESP32
Input
1C:100-240V ~ 50/60Hz Max 5A
2C:100-240V ~ 50/60Hz Max 10A
3C:100-240V ~ 50/60Hz Max 15A
4C:100-240V ~ 50/60Hz Max 16A
Output
1C:100-240V ~ 50/60Hz Max 5A
2C:100-240V ~ 50/60Hz Max 5A/Gang 10A/Total
3C:100-240V ~ 50/60Hz Max 5A/Gang 15A/Total
4C:100-240V ~ 50/60Hz Max 4A/Gang 16A/Total
LED load
1C: 150W Max@240V,75W Max@100V
2C: 150W Max@240V/Gang,75W Max@100V/Gang
3C: 150W Max@240V/Gang,75W Max@100V/Gang
4C: 150W Max@240V/Gang,75W Max@100V/Gang
4C: 150W Max@240V/Gang,75W Max@100V/Gang
Wireless Connectivity
Wi-Fi IEEE802.11b/g/n2.4GHz
Net Weight
1C(164g), 2C(168.5g), 3C(174g), 4C(181g)
Dimension
86x86x39mm
Color
White
Casing Material
PC +CRS
Applicable Place
Indoor
Working Temperature
-10℃~40℃
Working Humidity
5%~95% RH, non-condensing
Certification
CE/SRRC/RoHS
Executive standard
EN IEC 60669-2-1
Download the“eWeLink”App
Please download the “eWeLink” App from Google Play Store or Apple App Store.
Installation
1. Power off
*Please install and maintain the device by a professional electrician. To avoid electric shock hazard, do not operate any connection or contact the terminal connector while the device is powered on!
2. Wiring instruction
- To ensure the safety of your electrical installation, it’s essential either a Miniature Circuit Breaker (MCB) or a Residual Current Operated Circuit Breaker (RCBO) with an electrical rating of 10A (T5-1C-86, T5-2C-86), 16A (T5-3C-86, T5-4C-86) has been installed before the TX Ultimate.
- Make sure all wires are connected correctly.
3. Power on
After powering on, the device will enter the Bluetooth pairing mode by default during the first use and the LED frame light will light in the “Cycle mode.”
*The device will exit the Bluetooth pairing mode when it doesn’t be paired successfully within 30mins. If you want to access the pairing mode again, touch the wall switch panel for 5s until the LED frame light lights in the “Cycle mode”.
Add a Device
eWeLink App Pairing
1.Download the“eWeLink”App
Please download the “eWeLink” App from Google Play Store or Apple App Store.
2.Add device
Scan the QR code on the device
Please follow the wiring instructions to connect the wires (ensure power is disconnected in advance and consult an electrician if needed)
Long press the button for 5 seconds
Check Wi-Fi LED indicator flashing status
(Cycle mode.）
Select“Add Device”
Search for the device and start connecting
Select the “Wi-Fi” network and enter the password
Device“Added completely”
Add eWeLink-Remote-devices
Click “eWeLink-Remote-devices” in the Device Settings
Click “Add” button, and eWeLink-Remote gateway will enter the learning mode
Click the sub-device button within 10 seconds
Click the button on the sub-device to add the device