Introduction
Smart Touch Wall Switch
User Manual
The TX Gen2 Smart Wall Touch Switch provides 1-3 channel (1C/2C/3C) control options with a 120-type panel design, supporting neutral-required supply modes. By connecting to Wi-Fi, you can remotely control, set timers, and create automation scenes through the eWeLink app. It is also compatible with the Matter ecosystem, seamlessly integrating with major smart home platforms like Apple Home, Google Home, and Amazon Alexa, enabling cross-brand smart interactions.
Remote Control
Smart Scene
Night Switch Locator
Voice Control
Detach Relay Mode
Share Control
Smart Schedule
Group Control
● Single press: Turn on/off the smart device
● Press and hold for 5 seconds: Device enters the pairing mode. (Pairing time 10 minutes)
② LED indicator (Blue)
eWeLink Ecosystem:
● Keeps on: Online.
● Slow flash once: Offline.
● Flashes two short and one long: Device is in pairing mode.
● Flashes twice: LAN.
Matter Ecosystem:
● Keeps on: Online.
● Slow flash once: Offline.
● Flashes two short and one long: Device is in pairing mode.
Platform Certification
Specification
Product name
TX Gen2
Product series
TX Series
Product type
Smart Touch Wall Switch
Model
Model T6-1C-120M, T6-2C-120M, T6-3C-120M
MCU
BK7238
Rating
1C: 100-240V~ 50/60Hz 10A Max Resistive load 
μ
2C: 100-240V~ 50/60Hz 10A/gang, Total 16A Max Resistive load μ
3C: 100-240V~ 50/60Hz 10A/gang, Total 16A Max Resistive load μ
LED load
1C: 150W@100V, 300W@240V
2C: 150W@100V/gang, 300W@240V/gang, Total 300W@100V, 600W@240V
3C: 150W@100V/gang, 300W@240V/gang, Total 450W@100V, 900W@240V
Wireless connectivity
Wi-Fi: IEEE 802.11b/g/n 2.4GHz
Net Weight
1C: 133.3g, 2C: 140.7g, 3C: 149.5g
Dimension
120x74x37.7mm
Color
White
Casing Material
PC+Glass
Diameter of wiring(recommend)
16AWG to 11AWG SOL/STR copper conductor only
Applicable Place
Indoor
Working Temperature
-10°C~40°C
Working Humidity
5%~95% RH, non-condensing
FCC ID
2APN5-T63C120M
Certification
CE/FCC/RoHS
Installation
1. Power off
WARNINGPlease install and maintain the device by a professional electrician. To avoid electric shock hazards, do not operate any connection or contact the terminal connector while the device is powered on!
2. Remove the protective cover
3. Panel Removal
4. Wiring instruction
To ensure the safety of your electrical installation, it’s essential either a Miniature Circuit Breaker (MCB) or a Residual Current operated Cicuit-breaker with Integral Overcurrent protection(RCBO) with an electrical rating of 10A, 16A has been installed before the T6-1C-120M(10A), T6-2C-120M(16A), T6-3C-120M(16A).
Make sure all wires are connected correctly.
Instructions for wiring symbols
| Terminals | |
| N | Neutral Line |
| L | Live Line |
| L out1 | Live Output Terminal__1(100-240V~) |
| L out2 | Live Output Terminal__2(100-240V~) |
| L out3 | Live Output Terminal__3(100-240V~) |
After completing the wiring, reinstall the protective cover in the original direction of removal.5. Installation
Power on
After powering on, the device will enter “pairing mode” during the first use. The LED indicator changes in a cycle of two short and one long flash and release.
Matter Ecosystem User Guide
Open a Matter-compatible App to scan the Matter QR code on the Quick Guide or the device itself to add the device.
Add to Apple via Matter
Add to Alexa via Matte
Add to Google via Mattee
Add to SmartThings via Matter
Add a Device
Download the eWeLink App
Please download the “eWeLink” App from Google Play Store or Apple App Store.
Scan QR Code to Add the Device
Scan the QR code on the quick guide or the device
Select “Add Device”
Check Wi-Fi LED indicator flashing status
(Two short and one long)
Search for the device and start connecting
Select the “Wi-Fi” network and enter the password
Device “Added completely”