Introduction

Zigbee Smart Wall Switch

User Manual

A Zigbee 3.0 1-gang wall switch that no-neutral-wire-required, supporting a maximum load of 10A. It features a Zigbee relay function, which effortlessly enhances Zigbee communication quality. Additionally, it can interact with other SONOFF devices in smart scenes to achieve your home automation.

Zigbee Repeater

Detach Relay Mode
Smart Schedule
Smart Scene

① Switch Button

  • Single press: Turn on/off the smart device
  • Quickly execute 5 “ON → OFF” cycles: Device enters the pairing mode. (Pairing time 3 minutes)

② Device Button

  • Single press: Turn on/off the smart device
  • Press and hold for 5 seconds: Device enters the pairing mode. (Pairing time 3 minutes)

③ LED indicator (Green)

  • Slow flash: Device is in pairing mode.
  • Keeps on: Connected to the gateway normally.
  • Stays off: Pairing failed/timeout.
  • Fast flash: Abnormal connection with the gateway.
Platform Certification

Specification

Product name

Orb-ZBW1

Product series

Fusion series

Product type

Zigbee smart wall switch

Model

ZBMINIR2-E

MCU

EFR32MG21

Rating

100-240V~ 50/60Hz 10A Max Resistive load μ

Wireless connectivity

Zigbee 3.0

Net weight

83.5g

Product dimension

86x86x34mm

Color

White

Casing material

PC

Diameter of wiring (recommend)

16AWG to 14AWG SOL/STR copper conductor only

Applicable place

Indoor

Working temperature

10T40 (-10℃-40℃)

Working humidity

5-95%RH, non-condensing

Certification

CE/RoHS

Installation

1. Power off

WARNING

Please install and maintain the device by a professional electrician. To avoid electric shock hazards, do not operate any connection or contact the terminal connector while the device is powered on!

2. Wiring instruction

To ensure the safety of your electrical installation, it’s essential that either a Miniature Circuit Breaker (MCB) or a Residual Current operated Circuit-breaker with Integral Overcurrent protection (RCBO) with an electrical rating of 10A has been installed before the MINIR4M-E.

Make sure all wires are connected correctly.

Instructions for wiring symbols

Terminals

Wires

N

Neutral Line

N

Neutral Line

L In

Live Line

L In

Live Line (100-240V~)

L Out

Live Output Terminaln (100-240V~)

3. Power on

After powering on, the device will enter the pairing mode defaulted during the first use and the LED signal indicator will “flash slowly”.

The device will exit the pairing mode if you do not operate it within 3mins. When you want to enter the pairing mode again, long press any button on the device for 5 seconds until the signal light “flashes slowly” and release.

Add a Device

eWeLink Ecosystem User Guide

① Download the eWeLink App

Please download the “eWeLink” App from Google Play Store or Apple App Store.

② Add SONOFF Zigbee Gateway

③ Network Configuration

Enter “Scan”.

Scan the QR code on the device

Select “Add Device”.

(If the device exits pairing mode) Long press the button for 5 seconds

Check LED indicator flashing status (Slow flash)

Select Zigbee gateway

Wait until the addition is done.

Compatible SONOFF Gateways

Recommended SONOFF gateway models: ZBBridge-P, ZBBridge-U, NSPanel Pro, iHost.

Other compatible SONOFF gateway models: ZBDongle-P, ZBDongle-E.

Installation

Factory Reset

Trigger conditions (any one condition met)

  • Press and hold the device button for 5 seconds.
  • Quickly perform 5 cycles of “ON→OFF”.
  • Delete the device on eWeLink.